Are you a user of the Samsung Galaxy S10 into safe mode? If it is so, please pay attention to this important information. By the way, have you known some tips for Samsung Galaxy S10 Safe mode? Safe mode allows you to turn on the device with third party app disabled. Then you can easily uninstall apps that may be causing a conflict or software problem.

 

What and Why Safe Mode?

Safe Mode disables any apps you have downloaded from another device. When Safe Mode is switched off, all the apps that you’ve installed will be restored. Reinstalling your computer. Information will reset, not disappear. Disconnect. Safety mode can be used to test virus apps if faced with a Screen overlay detected. What is Safe Mode?

What to do in safe mode

Safe Modes is a simple and safe way of solving Android concerns and determining why your device fails to function properly. After you have resolved the issue, you can restart your smartphone and continue to use it normally.

What is Safe Mode?

Safe Mode allows you to run your iPhone as normally as possible, but it blocks third party apps from third parties. You can verify that your smartphone is not having OS issues if you try to put it in safe mode but don’t experience the problem. These are actually pre-installed apps that you have downloaded to fix your smartphone.

 

How to enter Safe Mode

In safe mode, your phone can only run the core applications preinstalled by its manufacturer. 1. Hold the power key until you see the icon for the power button go off. 1. To turn off a cell, use the power off button. 4. Select the Security mode. You will notice a safety setting in the left corner of your screen once you start up the device.

Steps to Boot Samsung Galaxy S10 into Safe Mode

When you find a concern that your Galaxy S10 is not working properly well in the normal mode, you should enable safe mode. In order to do it, you have to follow the steps below.

1. Press and hold the Power button

The first step to reboot your Galaxy S10 is pressing and holding the Power button. You should do it until you see the power button off switch in the window, and then just release it.

2. Touch and hold Power off

 

Then, you need to touch and hold the Power off-key until you see the Safe mode. Don’t forget to release it too!

3. Tap Safe mode

The third step is tapping the Safe mode. It is done in order to enable you to confirm.

4. Wait for the process

In order to complete the process, you are suggested to wait for it. You need to know that the process is slow and can take about thirty seconds to complete the process.

5. Upon reboot

At last, just upon reboot. Then, you will find the Safe mode that appears in the lower left of the home screen.

How to Turn off Safe Mode

1. Press and hold the Power key.
2. Tap Restart > Restart.
3. The device will restart in standard mode and you can resume normal use.

An alternate method is available

• Press and hold the Power button until the Power off box prompt appears.
• Touch and hold Power off until the Safe mode prompt appears.
• To confirm, normal mode. (you can Try this if you have a problem with Volume Down)

Here are some methods to disable Safe Mode on your Android Device.

1. Restart your Android Device.
2. Using Notification Panel.
3. Using Power Up with Volume down keys.
4. Take out the battery from your device.
5. By removing apps.
6. Factory Reset your Android Device.

The information that is above is for Safe Mode, which will enable safe mode you can use on your Galaxy S10. Please make sure you apply these two tips, especially considering the importance of this information.

How do I force my Samsung into Safe Mode?

Can I use Safe Mode? Then press and hold it. Powered up. Presses and holds the Power off icons. Push & Save! Safe mode icon. The security mode app has been activated.

I hope we were able to fix your problem. Please share this article if it was helpful. Thanks for reading this post!

Whenever you buy a new smartphone, the increased number of features causes difficulties.

To make the familiar functions of your Android phone not confusing, we have described simple steps to capture a screenshot on galaxy note 20 and Samsung Galaxy Note 20 Ultra.

 

How to capture an apps screen on Samsung Galaxy Note?

If you are switching from any other Android / iOS device, the easiest thing to know first is to take a screenshot on the new device.

There are several ways to take a screenshot on different Samsung models.

First method: Use Volume Down and Power buttons

Using hardware keys to take a screenshot is one of the most common ways to take a screenshot on almost every smartphone.

This basic screenshot shortcut is to press the volume key and power button of your Samsung device simultaneously, wait for a few seconds and find your screenshots in Google Photos on the home screen or the Screenshot folder in the phone’s gallery.

Please note:

If you hold too long, you’ll get to the power menu.

 

Second method: Capture screen with Palm Swipe

Samsung has added a fairly convenient way to take a screenshot and called it Palm Swipe.

To activate the Swipe feature on your Samsung Galaxy Note20 or Samsung Galaxy Note 20 Ultra, follow the listed steps:

1. go to the Settings app;
2. click on Advanced features;
3. tap Motions and gestures;
4. activate the option Move palm to capture screen;
5. switch the screen to the picture you want to capture screen;
6. swipe your hand across the screen without touching it;
7. enjoy the captured screen.

Third method: Screenshot using the Smart Capture feature

Have you ever run into a situation where you want to take a screenshot of something, but it just doesn’t fit in the frame?

So, you have to take two or more screenshots.

Samsung phones have already solved this problem with the Smart Capture advanced features option.

Smart Capture is another prominent feature that allows users to quickly edit a screenshot or scroll to capture more of the screen, or even share a screenshot without having to open the Gallery app.

As with the Palm feature, you need to check your Samsung Galaxy Note20 display for advanced features first:

1. open the Settings app;
2. find Advanced features;
3. choose Screenshots and screen recorder;
4. enable the Screenshot toolbar switch.

Now you can make a screenshot of the current content and save the hidden content on an elongated page using Smart Capture:

1. press and hold the volume down and power key;
2. tap a button called scroll screenshot at the bottom;
3. keep tapping Scroll Capture to take a screenshot as long as you want it.

On the bottom screenshot toolbar, you will see various options:

• scroll screenshot: make a long screenshot.
• Crop: leave only the desired part of the screenshot on the screen.
• Tag: now you won’t lose the screenshot you want among many others.
• Share: send captured screen to other people.

Fourth Method: Take a screenshot with the S Pen

To take a screenshot on your Galaxy Note 20 device with the S Pen, tap the screen with the stylus and hold for a little while holding down the button.

You will see a screen flash and hear a notification sound about the screenshot.

Once you took a screenshot, an image with a screenshot toolbar will appear.

 

Fifth Method: Use the Air command panel

Air Command is the interface for using all the different functions of the stylus. You can see it when removing the S Pen from the device.

There are three ways to start Air Command:

1. If your phone is unlocked, removing the S Pen from the Galaxy Note will automatically open the Air Command menu. Please note: the first time you do this, a quick guide will appear. Follow the instructions on the screen.
2. Move the S Pen next to the screen and press the S Pen button.
3. Click the Air Command icon with the S Pen.

 

Instructions for turning the Air Command menu on and off:

1. go to the Settings app;
2. find Advanced features;
3. tap Screenshots and screen recorder;
4. enable the Screenshot toolbar.

 

The Air Command feature offers you access to a variety of customizable tools:

• Smart select option. With Smart Select, you can capture only the part of the current screen you want to save, instead of capturing the entire screen. In addition, this panel gives you the ability to easily create a GIF file by capturing everything that appears on the screen.
• Screen Write. After taking a screenshot, you will get directly to the editing panel with the pen icon, where you can write on the screen with the S Pen.
• Notes. There are two functions from Air Command for notes. The first creates a new note, and the second opens the Samsung Notes to view previous notes. You can sync the notes between devices through your Samsung account. This is useful if you decide to switch to a new Note device in the future.

 

Sixth Method: Capture pages with Bixby software

Bixby is Samsung’s voice assistant.

The assistant allows you to perform some device-related tasks.

Although Bixby is not the most exciting assistant, you can always use it to take a screenshot on your Galaxy Note 20 or Galaxy Note 20 Ultra device, especially if you just can’t take a screenshot using the side key or palm swipes.

Here’s scroll screenshot of how to use Bixby to take a screenshot:

1. open the app/screen you want to capture;
2. press and hold the Bixby button;
3. say “Take a screenshot.”

Please note:

If you always have Bixby enabled, you can simply say “Hi, Bixby” to activate Bixby and then say “Take a screenshot.”

 

Seventh Method: Use the Bixby key

There is one more way how to take a screenshot on Galaxy Note 20.

Now you can use the Bixby key to take a screenshot, and here’s how:

1. go to the Settings app;
2. click on Advanced features;
3. tap Bixby key;
4. select Double-tap to open Bixby;
5. turn on, Use One-Tap;
6. select Run Quick Commands;
7. click on the Settings icon;
8. tap Go to Quick Commands
9. tap the + icon in the upper-right corner of the screen;
10. name the command “Screenshot”;
11. click “+ add command”.

Now either click on the Say command or Enter command and then say the words “Take a screenshot” or enter – take a screenshot.Click on Save and go back to the Execute quick command page and then select Screenshot command or whatever name you used for the command.

Just press the Bixby button once to take a screenshot.

 

Helpful hint:

To avoid capturing the Bixby command animation on the screenshot, wait for about a second after pressing the Bixby key and then try to quickly press close the icon.

This will remove the Bixby command animation; however, you will have a notification bar on captured screen.

Eighth Method: Ask Google Assistant to take a screenshot

Many people consider google Assistant the best assistant for smartphones, which is actually true in most usage scenarios.

Here’s how to take a screenshot using Google Assistant:

1. open the app/screen you want to screenshot;
2. launch Google Assistant by pressing and holding the home key;
3. after opening Google Assistant, say “Take a screenshot.”

As with Bixby, if you enabled Google Assistant, you can simply say “Okay, Google” to invoke Google Assistant.

Frequently Asked Questions

If you still have questions after reading this article, please read the answers to the most common questions from users.

We have tried to answer briefly and clearly.

How do you screen shot on a Galaxy Note?

There are the most simple ways how to take a screenshot on Galaxy Note 20 or Galaxy Note 20 ultra:

• use side keys (power + volume down);
• use the Palm Swipe feature.

How do you screenshot on a Galaxy s20 without the buttons?

There are several ways to take a screenshot without using buttons:

• Palm Swipe feature;
• Voice command (Bixby or Google Assistant);
• Air command panel.

How do I take a long screenshot on my note 20?

To take a longer screenshot and show all the content in one screen capture image, use the screenshot toolbar in Smart Capture.

Where is the screenshot button on the Samsung s20?

There is a special down arrow key combination to create a screenshot: press the volume key and power button on left side of your Samsung device simultaneously.

How to take a screenshot on Galaxy Note 20?

You can use your phone’s side buttons (power + volume down) or the advanced features that are described in our article above.

 

Conclusion

In this article, we have tried to describe in detail all available methods of creating a screen capture switch for the Samsung Galaxy Note20 and Samsung Galaxy Note 20 Ultra.

As you can see, there are a lot of methods for taking screenshots.

All you have to do is to choose the one that suits you best.

Samsung Galaxy S10 is a great phone that comes recently. However, problems may happen when you use the phone. Battery drain problems are kinds of serious problems that can occur to your Samsung galaxy s10. In this case, you need to know the causes and also have tips about the Android battery life draining fast fix.

Thus, you will not experience the problems for a long time and can fix them immediately. If you want to fix Galaxy S10 battery drain problems, have a look at the explanation below.

 

How to Fix Bad Galaxy S10 Battery Life

If you want your Samsung galaxy s10 device to last longer, consider upgrading to the Galaxy S10 and taking advantage of its smart advanced features. The Samsung galaxy s10 software can learn your usage habits to optimize power usage, and regular updates improve improves battery life and efficiency even further.

Keep an eye out for the Galaxy Android 10 update, which promises even bigger improvements and will soon be available worldwide. Don’t miss out on these enhancements and stay updated by checking out our next blog. Take care of yourself and your device.

Close Background Apps

The software that you installed runs in the background while no one is using it. Whenever an app was opened in the background this app kept updated with content. When using the app, it opens quicker because of the lack of having to reload the information at the start of the process. Its effective, but it can slough your phones.

Reboot Your Device

This technique solves many problems including problems arising from battery optimization. Restart the device using the power button by holding down the battery and selecting the option “Restart”.

Disable the Always-On Display

The big 6.1 or 6.4 inches screens have become the biggest battery drain of the Samsung Galaxy S10. Although most people are very happy with the always-on screen feature, a turnoff could be beneficial to extend battery life.

This feature allows the user to adjust the timer and battery level in an AOD device.

Samsung galaxy s10 says its monitors use just one battery and it uses less than 10% of the power for 8 hours of operation.

But if there is no benefit you can turn it back. Turn on Settings > Lock screen > Disable Automatic Display.

Turn Off Tap To Wake Feature (Lift to Wake)

Many Samsung galaxy s10 users complain that the Galaxy S10 has been accidentally tapped and causes a quick drain on the battery. One reported his Samsung Galaxy S10 had begun recording. If this happens then shut out your tap to wake feature. Go back.

The Common Causes of Battery Drain Problems

The battery drain problem will not come without some causes. So, here are the causes you need to know that is possible to make a problem for your S10 battery.

1. “Always On Display”

The “Always On Display” is an amazing feature of the S10 that can give you information only at a glance. However, it has a bad effect on the the battery performance. It will fasten the battery usage so that the battery energy is easy to drain.

2. Too many apps

Every app will spend small battery usage each second. When there are too many apps in your S10, your phone needs so much battery energy to run the apps.

3. Too bright screen

The bright screen will take so much battery energy. The brighter your phone set, the faster the battery drain. This matter can be one of the most often matter to make the battery drain to your phone.

How to Fix Battery Drain Problems on Your Samsung Galaxy S10

From a few problems that can cause the Galaxy s10 battery to drain, there are a few tips to fix them. Here they are.

1. Turn off “Always On Display”

As the feature of “Always On Display” always absorbs battery energy every time, you can turn it off if you don’t need it. To turn it off, you can go to and open Settings, Choose Lock screen, and Always On Display. After that, you can set this feature off.

 

2. Uninstall or sleep the infrequently-used apps

This way is effective to make your battery stay longer and to fix the battery drain problems. To make it happen, you can go to Device care, Battery, and then click the Menu Button. After that, you can find Sleeping apps and make your infrequently-used apps sleep while not needed.

 

3. Set up Power Saving Mode

To set up Power Saving Mode is the most effective way to fix the battery drain problems. By turning it on, the battery energy on your phone will be more durable. Then, to make it happen, you can go to the Device care that is located under the Battery sections. You can change to “medium” power saving to lengthen your battery power.

 

That is all about the causes and how to fix Galaxy S10 battery drain problems you should recognize. Thus, you can prevent problems after knowing the tips to fix them.

Check for Software Updates

To fix S10 battery drain issues, start by updating your smartphone’s software. This can quickly resolve battery problems and provide the latest security patch and bug fixes. For more, see how to stop software updates in automatic mode.

To check for software updates on your Samsung Galaxy S10/S10+, follow the steps below:

1.  Head to Settings > About Phone > Software Updates
2. If an update is available, tap Download and Install

If your device has the latest software but still has battery drain issues, follow these steps.

Reboot your device

It’s common for Android phones to get buggy if not rebooted regularly. Restarting your smartphone once a week can fix minor issues and improve battery life. Samsung galaxy s10 S10 series has a useful feature that automatically reboots your device once a week at night. To enable this feature, follow the steps below.

1. Head to Settings > Device Care

2. Tap the 3 dots present at the top

3. Select Auto Restart

Rebooting your device at regular intervals is one of the easiest ways to improve battery life as well as the overall performance of your Galaxy S10 and S10+ smartphone.

Lower your Screen Brightness and adjust the Screen Timer settings

The S10 has a colorful AMOLED display. Brighter displays look stunning but consume more power. Using maximum brightness for extended periods is unhealthy for the battery and causes overheating issues. It’s better to keep the display at a lower level, around 35% to 40%. To do this, adjust the brightness to a comfortable level.

Head to Settings > Display > Brightness and adjust the brightness.

The S10 has an adaptive brightness mode that can improve battery life. It adjusts brightness based on ambient light when you’re outdoors. Indoors, it’s best to manually set the brightness to a low percentage.

Checking phones frequently is common, but the screen staying on after use for 1-5 minutes draws a lot of power. To save battery, configure the Screen Timer setting to 30 seconds. Here’s how to do it on Samsung Galaxy S10/S10+.

1. Head to Settings > Display
2. Tap Screen timeout and select 30 seconds

Turn ON Accidental Touch Protection

Enabling the Accidental Touch Protection feature on your Samsung galaxy s10 S10 and S10+ can be helpful. It prevents accidental touches while the phone is in your pocket or bag. This can save you from accidentally messaging or calling someone.

It can also prevent the camera app or flashlight from staying on due to pocket touches. Additionally, it can help reduce battery drain.

Use Lower Resolution

The S10’s high-resolution display looks great but drains the battery faster. More pixels use more power and stress the battery. Some apps use extra power for high-resolution elements like graphic-intensive games. Doing this regularly for long periods of time will affect the phone’s battery life.

The Galaxy S10 and S10+ can support WQHD+ resolution. However, the default display settings are set to a lower FHD+ resolution. If you want to save battery life, switch the screen resolution back to the lower FHD+ or HD+ resolution.

8. Check for Battery Consuming Apps

To solve battery drain issues on your Galaxy S10, check the Battery Usage. It shows which apps and system functions are consuming the most battery. If an app uses too much battery, it can cause overheating and poor performance. Identify and remove or update these apps to improve your phone’s CPU.

Some apps, like social networking apps, frequently contact remote servers for updates. This can cause a battery drain on your device. If you use a lot of these apps, you may experience excessive battery drain. To prevent issues on your smartphone, you should remove these apps or use them less frequently.

Follow the steps mentioned below to spot the battery-consuming apps:

1. Head to Settings

2. Tap Device Maintenance

3. Tap Battery > Battery Usage

You should see the Screen, Android system, and Device idle at the top. However, if you see any third-party apps at the top, it’s bad for your device. In such situations, you should first try updating these apps and if they still misbehave, you must uninstall or downgrade such apps to fix the battery drain issues.

Also, make sure to close an app when you don’t need it, otherwise, it will keep updating content in the background and eventually drain the battery.

Uninstall infrequently used apps

Some apps on your device can drain the battery and affect performance. If an infrequently used app is at the top of Battery Usage, there may be an issue with it. This could be due to poor coding or software incompatibility.

Bloatware apps on Samsung Galaxy devices are often the culprit. You can uninstall or disable these apps if you don’t use them. If you want to keep them, follow the steps below.

Disable the Lift to Wake feature

Many users have reported that their Galaxy S10 display wakes up automatically even when they just lift their phones or touch them accidentally. This could cause S10 battery drain problems and leave you with no juice to use your phone when you need it the most. If you don’t want the display of your smartphone to wake automatically and consume unnecessary battery, you must disable the Lift to Wake feature on your Galaxy smartphone. Here’s how to do it.

1. Open Settings > Advanced features
2. Tap Motion and Gestures
3. Then, turn OFF the Lift to Wake and Double Tap to Wake options.

Add Sleeping Apps

Apps can be put to sleep on your smartphone without draining the battery. Samsung allows you to put unused apps to sleep mode so they can’t run in the background and drain the battery when your S10 or S10+ is not in use.

Here’s how to add Sleeping apps on your Galaxy S10/S10 Plus:

1. Head to Settings
2. Tap Device Care > Battery
3. Now, tap the 3 dots and go to Settings
4. Go to Sleeping apps

You can now put some or all of your third-party apps to sleep. It’s worth mentioning that if you’ve put an app to sleep and want to use it on purpose, it may not perform as intended by the developer.

Apps can drain your device’s battery even if you’ve put them to sleep. To avoid this, only install apps you’ll use. Regularly monitor third-party apps and uninstall interfering or misbehaving ones to improve device performance.

If an important app is consuming too much battery after a recent update then make sure to check the latest reviews of your device in Google Play Store. You can also report your issue and hope to receive a quick fix for the bug.

11. Use Power Saving mode

In some situations, your phone’s battery may be low and you need to make an important call. If you can’t charge your phone, Power Saving mode can help. This mode reduces the battery requirements of your phone by slowing down the processor and lowering the screen brightness and resolution. It’s a great option to consider.

To set up Power Saving mode, follow the steps mentioned below:

1. Go to Settings
2. Tap Device Care > Battery
3. Select Power Mode

You can choose from the following modes:

1. The Optimized power-saving mode will help your phone to find the ideal balance between performance and available battery life.

2. The Medium power-saving mode will slightly limit the speed of your processor, restrict the background factory data reset, and turn off Always-on Display to extend the battery life and allow you to use your phone a bit longer.

3. The Maximum power-saving mode comes to a factory data reset rescue in terrible situations when your phone’s battery is almost dying. This mode will restrict many functions, but you’ll be still able to make calls, send texts, and use certain apps. You might not be able to use everything on your phone, but you can easily survive morning to night, without juicing up your device.

4. The Adaptive power-saving mode will automatically save battery life based on your usage patterns.

Turn OFF 5G

If you’re using 5G on your Galaxy S10 smartphone, then switching back to LTE (4G) will help you save a lot of power. Moreover, 5G will consume power even if you’re not using it. That is because it keeps looking for a faster connection (sub6).  Here’s how to disable 5G on Samsung Galaxy S10 5G:

1. Go to Settings >Connection > Mobile Network > Network Mode
2. Tap on 4G (LTE) Auto Connect option

This should help you avoid battery drain on the Samsung Galaxy S10 5G.

Turn off features that you don’t use

Samsung smartphones have both useful and unnecessary features that can drain your device’s power. These features, like Edge Panel, Edge Lighting, and gesture control, are not needed by regular users. These features consume unnecessary power, so it’s best to disable them if you want to improve your Galaxy S10 battery life.

14. Check Network functions

There are network functions that use sensors and drain your smartphone battery. Wi-Fi is better for battery life than mobile data, but turn it off when not in use. The same goes for Mobile Data, Bluetooth, and GPS. GPS is used by many apps and consumes a lot of battery, so turning it off can help.

Don’t forget to turn these functions off when you don’t need them to save battery. If you have problems when turning it back on, please refer here: How to Fix Galaxy S10 Bluetooth Won’t Pair with Another Device.

Head to Settings > Biometrics and security > Location > Tap Location Switch and Turn OFF.

We would also like to mention something very important here- whenever you find there’s a poor network on your phone, make sure to put your phone in Airplane mode. This is because your phone will constantly try to find and connect to a network, and it will lead to more battery drain.

You’ll anyway not be able to use your phone in such situations, so it’s better to put it on Airplane mode and save battery or just use Wi-Fi in those situations. The most common example of these situations is a basement or an area where there’s a bad network at all times.

All these little things, when combined together can make a huge difference in the performance and overall battery life.

Use Night/Dark Mode

One UI from Samsung has an awesome Night mode. It darkens your device’s display for strain-free viewing in low-light conditions. This light mode works throughout the One UI software experience and claims to provide up to 2 hours of longer battery life on your S10 devices. Enabling Night mode is easy.

1. Go to Settings
2. Tap Display
3. The 4th option is the Night mode
4. Tap on the toggle to enable it and tap on the text to dive into enable night mode scheduling settings

If you want to fix the battery drain issue on your S10, consider taking small steps. One such step is using black or dark wallpaper. Samsung’s AMOLED screen technology uses more power when displaying more colors. The S10’s screen can display black more efficiently since the pixels don’t turn on for black images. Therefore, using dark wallpaper can help you save more battery on your S10 smartphone.

Why does my Galaxy S10 battery drain so fast?

The longer an application can run in the background the more power it uses. Use limits are available to reduce battery usage. Take action!

How do I fix my S10 battery drain?

Can you fix bad Samsung Galaxy S10 batteries? Make sure apps have high usage of power. Rebooting your smartphone can increase the battery life. Disable always on display. Use black wallpaper. Turn on things we do not want. Set wireless / gym / Bluetooth settings. Monitor screen brightness and sleep time.

How do I fix my Samsung S10 Plus battery draining fast?

How do Samsung phones get battery life problems ( battery draining too quickly? Make sure your battery life usage is healthy. … Close background application. … Get your app on your bed. … Allow adaptive battery activation, disable unused apps, and improve configuration. … Start the computer. … Don’t use tap on wake function to wake up. Turn the power key with the Night mode on.